Power Tools Replacement Parts
The Saw Center has in stock a large inventory of replacement parts for your power tools. Below is are some of the more popular repair parts that we sell. If you need a part not listed, call us and we can quote you a price and delivery time. Be sure to have the brand, model number and serial number on hand when you call.
(with screw terminals )
|
THE BASIC SWITCH This is our most popular style switch. It's used in dozens of different tools. If the switch you need looks anything like this, chances are it will fit as the mounting and wiring are universal. Used in Porter Cable 315-1, 617, saws, Milwaukee 63XX and 64XX series saws, Makita 5007NB, Black & Decker Sawcat saws (without brake), DeWalt DW359 series, Skil 553,554,77, 865 and many others. Can be used in older Porter Cable 115, 146 and 315 saws with the addition of tape insulation wrapped around terminals. TTS501 TTS505
Qty:
Price: $22.95
Qty: Price: $27.95 For DeWalt DW364/384 Saws only use: 42997700 |
This is the same switch as above, but with a lock button. Used in Porter Cable and Milwaukee belt sanders.TTS500 |
 |
A popular toggle switch rated for 20 Amps. Used as standard replacement switch in older Delta or Rockwell contractor's saws. TS 211 |
|
 Toggle Switch This switch is used in a variety of tools, including Delta homeshop tools, Skil, some Sears, and a lot of "offshore" brands. If you have a rectangular cutout hole, chances are that this switch will fit.2- pole |
 |
Delta Safety Switch Used on the newer, Delta Contractors table saws, this switch can be fitted to most any table saw for increased operator safety. Features a large "off" toggle that is fast & easy to hit in an emergency ( like a blade jam) and comes with a quick motor disconnect cord. With bracket. 115 Volts 34-278
Qty:
Price: $79.95
|
|
Replacement Manual push-button switch Works on 14" Band Saws, Dust collectors, 15" Planer some Table Saws For Single phase, manual start only. Replaces obsolete Furnas 12BAT. Includes new push-button plate. 905224
|
 |
 |
Power Tool Cords To choose the cord you need for your tool, first check it to see if it requires a two wire or three wire cord. Check the data label on the tool. If it says :Double Insulated-Grounding Not Required" , you may use a two wire cord. If it says "Grounding Required" or if it doesn't say anything, you must use a three wire cord with a grounding prong. 9 Foot Power Cord 2- wire straight end: ..with molded strain relief:Qty: Price: $14.50 9 Foot Power Cord 3- wire straight end: Qty: Price: $16.50With Molded strain relief: Qty: Price: $17.50
|
Switch
for DeWalt DW704 & DW705 Type 1,2,3 use: 28794800