Bargains Page

*American General Tools* P635 23 Gauge Micro Pin Nailer The P635 23 gauge Pin Nailer is compact and light-weight but big on performance. It uses 23 gauge micro pin nails similar to Senco and Porter Cable models from 1/2 inch to 1-3/8 inch and produces a hole that is barely visible to the naked eye. The P635 23 gauge pin nailer is ideal for hobbies and intricate finish work. Includes case. P635 Micro Pin Nailer Qty: Price: $69.95 .		Oldham 12" 48 Tooth Miter Box Blade 1" Arbor Special Price: $21.95 12 inch 48 tooth Oldham Blade Qty: Price:$21.95
	Freud LU98R010 Laminate/Melamine 80T TCG Freud Laminate Blade Qty: Price: $79.90 (Normal List Price:$138.90)	Oldham 10" "Super Duty" 40 Tooth Miter Box/Table Saw Blade. 5/8" Arbor Special: $19.95 10 inch 40 tooth Oldham Blade Qty: Price: $19.95
	LU97R010 for Double Sided Laminate/Melamine 80T TCG. Freud Laminate Blade Qty: Price: $89.00 (Normal List Price:$139.80)

American General Tools

2-1/2 Inch 15 Gauge Finish Nailer NT65

	Selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation
	Depth of drive adjustment, to countersink or flush drive nails
	Includes Case
	Adjustable air deflector
	Long-lasting rubber grip, for added comfort
	Lightweight and well balanced for easy maneuverability
	Fastener Type: 15 Gauge Finish
	Fastener Length Capacity: 2-1/2"
	Fastener Diameter Range: 15 Gauge
	Magazine Angle: 34 Degrees
	Magazine Capacity: 100
	Parts interchange with Hitachi

78-850 Biesmeyer Table Board

27" x 14"x 3" ( check size before ordering)

Save! Makita Bare 18V LXT Tools. Add to your Makita LXT tool collection at substantial savings.. BHP454Z 18V Heavy Duty Hammer Drill 18V LXT Hammer Drill Qty: Price: $119.95 *(Bare Tool only, batteries & charger extra)*	Save! Makita Bare 18V LXT Tools. Add to your Makita LXT tool collection at substantial savings.. BSS611 18V6 1/2” Circ Saw 18V LXT Saw Qty: Price: $109.00 *(Bare Tool only, batteries & charger extra)*
Save! Makita Bare 18V LXT Tools. Add to your Makita LXT tool collection at substantial savings.. BUB182Z 18V Blower 18V LXT Blower Qty: Price: $109.00 (Bare Tool only, batteries & charger extr	Save! Makita Bare 18V LXT Tools. Add to your Makita LXT tool collection at substantial savings.. BGA452Z 18V Grinder 18V LXT Grinder Qty: Price: $99.00 (Bare Tool only, batteries & charger extra)

Makita LED Light
Qty: Price: $19.95

(Battery sold separately)

Makita's new L.E.D. Flashlight is a perfect addition to the end user who requires a bright light. Technology has improved to allow for a long run time without reducing brightness.

	Bright 6 L.E.D. Flashlight emits at 500 Lux.
	Runs up to 25-Hours per charge on a single 18-Volt Compact Lithium-Ion Battery.
	Hand strap secures the flashlight for added convenience.
	Compact design; only 5-7/8-Inch in length and weighs just 1.3-Pound.
	1-Year warranty on Flashlight.

DEWALT DWMTC15

15-Pc. Magnetic Tough Case
Qty: Price: $14.95

2 high strength magnets allow to be fixed to any ferrous surface.

Built in hooks allow the case to hang anywhere

Impact resistant material adds increased durability tp prevent breakage

Includes an 15 piece assortment of the most popular bits

Model: MAC700

Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance

Powerful 2.0 HP 4-Pole motor produces 3.3 CFM at 90 PSI for increased productivity

Pump runs at lower RPM (1,730) resulting in lower noise (80dB) and improved pump durability

Low AMP draw reduces incidences of tripped breakers at start-up

Pump is oil-lubricated for cooler running temperatures and reduced wear

Roll-bar Handle - For portability and additional protection

Large automotive style industrial air filter for increased air intake and greater efficiency

Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance

Oil sight glass for fast, easy and efficient maintenance

Lever handle ball valve - tank drain valve improves upon standard petcock design for easier maintenance

Built-in thermal overload for additional motor protection

Model: MAC2400

Oil Lubricated Pump Runs Quietly and Reliably

Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance

Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity

Pump runs at lower RPM (1,730) resulting in lower noise (79dB) and

improved pump durability